NEW: EVO version with even better thermal decoupling of the 4 fixing bolts!
This flange developed by us allows the installation of an air heater in floor or walls with up to 48mm wall thickness.
While an air heater is normally only suitable for installation in thin sheet metal walls or floors, this flange can also be used for an insulated floor structure with a wooden plate or a sandwich plate up to 48 mm thick. There is no need to drill and scribe the many different holes for combustion air, exhaust gas, fuel line and fastenings - these are already integrated in the flange and allow direct installation of the heating in any direction. Only a rectangular cut-out of approx. 88x130mm is required.
Procedure:
Find a suitable flat installation location with max. 48mm total thickness (e.g. floor plate + insulation + wooden plate).
Cut rectangular cut-out 88x130mm
Insert mounting flange with sealing compound and screw tight.
Insert the heater into the flange from the inside and mount all hoses etc. from the outside.
Stainless steel, laser cut, welded, partly glass bead blasted.
Suitable for planar air heaters 2D, 4D and 44D, as well as heaters with the same flange pattern from Eberspächer and Webasto if necessary.
Registered Community Design!